Part I: General Information

Procedure

The ICIP 2023 paper submission and review process is being conducted in a manner similar to previous conferences:

• Authors who wish to participate in the conference will create documents consisting of a complete description of their ideas and applicable research results in a maximum of 4 pages for technical content including figures and possible references, and with one additional optional 5th page containing only references.
• Submit the paper and copyright form electronically. This paper submission must be submitted in final, publishable form before the submission deadline listed below.
• Check the ICIP 2023 website for the status of your paper.
• Paper submissions will be reviewed by experts selected by the conference committee for their demonstrated knowledge of particular topics. The progress and results of the review process will be posted on this website, and authors will also be notified of the review results by email.
• If your paper is accepted, it will be assigned to either a lecture or a poster session by the program committee. Prepare a lecture or poster presentation accordingly, following the guidelines included in this document.
• All papers accepted to ICIP 2023 will be published 30 days prior to the first day of the conference and will be freely accessible and downloadable by all in final format from until the end of the final day of the conference..

The review process is being conducted entirely online. To make the review process easy for the reviewers, and to assure that the paper submissions will be readable through the online review system, we ask that authors submit paper documents that are formatted according to the Paper Kit instructions included here.

---

Requirements

Papers may be no longer than 5 pages, including all text, figures, and references, and the 5th page may contain only references.

Papers must be submitted by the deadline. There will be no exceptions.

Accepted papers MUST be presented at the conference by one of the authors. One of the authors MUST register for the conference at one of the author rates offered, and MUST register before the deadline given for author registration. Failure to register before the deadline will result in automatic withdrawal of your paper from the conference proceedings and program. A single registration may cover up to four (4) papers.

---

---

Correspondence

Please make sure to include the conference name (ICIP 2023) and your paper number on all correspondence.

Additional questions regarding submission of papers should be directed to the following address:

ICIP 2023
Conference Management Services, Inc.
2711 Pierre Place
College Station, Texas, 77845, USA
(979) 846-6800
(979) 846-6900 [fax]
icip2023@cmsworkshops.com

---

Frequently Asked Questions

• Document Preparation
  • 1) The LaTeX Template, Microsoft Word Template, and PDF Sample files do not have the exact margins or measurements as those described in the paper kit. What are the correct measurements?
  • 2) I need more time to complete my manuscript; I cannot complete it by the published deadline. Can I have an extension?
  • 3) My manuscript has authors from more than 2 affiliations; My manuscript has several authors. But the LaTeX template supports only 2 authors. How should I list multiple authors in the heading of my manuscript?
• Manuscript Submission
  • 4) How will I know if my submission is valid for review?
  • 5) Why did my submission fail document inspection? Can I try again?
  • 6) How can I withdraw or cancel my submission?
  • 7) I recently discovered that I am required to acknowledge the sponsor of my research in order to receive funding, but the deadline for submitting the final manuscript has passed. What should I do?
• Registration
  • 8) The paper kit and web site state that every paper must have an author registered by a certain date. If I am the presenting author of multiple papers, does this mean I should register multiple times?
  • 9) The web site states that only non-student registrations can be linked with accepted papers. I am a student and will be the presenting author; how should I register?
  • 10) The members of our team have not yet decided who will be the one(s) to attend and present our paper(s), but the author registration deadline is approaching. Can we change the name of the person registered later on?
  • 11) When I registered, I was not a member of IEEE, but I recently did join. Can I receive a refund of the difference between the member and non-member registration fees?

Document Preparation

1) The LaTeX Template, Microsoft Word Template, and PDF Sample files do not have the exact margins or measurements as those described in the paper kit. What are the correct measurements?

1-Ans) The Paper Kit description should be considered the final word. Because of software version differences, installed font differences, and other system-specific issues, the final PDF or Postscript file that you create from the given templates may not exactly match the sample manuscript found in the paper kit. The measurements given in these templates and in the official Paper Kit description are not intended to be followed with extreme precision. However, the general structure and layout of the document should be substantially the same as the templates and sample manuscript. This means: the title should appear at the top of the first page, the author list should appear beneath the title, the first paragraph of the document should be the abstract section, the document should be in two-column format with reasonable margins and column spacing, and the font size should be no smaller than 9pt.

---

2) I need more time to complete my manuscript; I cannot complete it by the published deadline. Can I have an extension?

2-Ans) The published manuscript submission deadline was selected so that submitted manuscripts may receive sufficient and thorough reviews and so that presenting authors of accepted papers will have sufficient time to arrange for travel to the event site. By granting an extension, the rest of the development of the technical program would be delayed. The deadline for submission of manuscripts is known well in advance, thus, no extension will be granted for any reason.

---

3) My manuscript has authors from more than 2 affiliations; My manuscript has several authors. But the LaTeX template supports only 2 authors. How should I list multiple authors in the heading of my manuscript?

3-Ans) There are several formats commonly used for formatting author lists of 3 or more authors or where there are 3 or more different affiliations for authors. The preferred method is to list the author names with identifying marks (superscript numbers, for example) and then a legend below the name list with the respective affiliation descriptions. Be sure that the author list does not exceed the margins of the page. An example is provided:

\name{Author Name$^{\star \dagger}$ \qquad Author Name$^{\star}$ \qquad Author Name$^{\dagger}$}
  
  \address{$^{\star}$ Affiliation Number One \\
      $^{\dagger}$}Affiliation Number Two

---

Manuscript Submission

4) How will I know if my submission is valid for review?

4-Ans) All submitted manuscripts will be inspected for general adherence to the paper kit guidelines (i.e. page count limits, page margins, font problems) and submission procedure (i.e. the title on the uploaded file matches the title typed into the web submission form, the author list on the uploaded file matches the author list typed into the web submission form, etc.). Authors designated as "contact author" will be notified by email only if any problems are found. The status of your submission can be checked online at any time using the assigned paper number and an access code.

---

5) Why did my submission fail document inspection? Can I try again?

5-Ans) There are many reasons why a submitted manuscript might fail the "inspection" process. The inspection failure notification email will contain a description of the problem. The "Revise an already-submitted paper" link on the website will allow for revising of submissions which did not pass inspection. Typically 3-4 days is allowed for corrections to be made in such cases. The most common reasons for inspection failure are:

• The author list shown on the uploaded document file does not match the author list typed into the online form. These two lists MUST MATCH EXACTLY in author names and the order in which these names appear on the uploaded document.
• Page numbers appear on the uploaded file. Do not include page numbers in the submitted manuscript.
• The author list on the uploaded manuscript is blank. Unless explicitly specified otherwise, the review process is not "double-blind". The submitted manuscript should be in publish-ready format.

---

6) How can I withdraw or cancel my submission?

6-Ans) Send an email to general support email address (icip2023@cmsworkshops.com) requesting the withdrawal of the manuscript. This email MUST include the assigned paper ID and should include in the cc: line all of the authors currently listed on the manuscript. If the latter is not done, then a note will be sent to all authors requesting confirmation of the request as withdrawal of a manuscript can only be done on the agreement of all authors.

---

7) I recently discovered that I am required to acknowledge the sponsor of my research in order to receive funding, but the deadline for submitting the final manuscript has passed. What should I do?

7-Ans) The deadlines for final manuscript submission are firm and are chosen to allow sufficent time for the preparation and production of the conference proceedings in time for distribution at the event. Be sure to check with financial sponsors before the final manuscript submission deadline concerning this potential requirement.

---

Registration

8) The paper kit and web site state that every paper must have an author registered by a certain date. If I am the presenting author of multiple papers, does this mean I should register multiple times?

8-Ans) No, each valid registration to the conference can be linked with up to 4 accepted papers. Note that the registered person should be a named author on any papers he or she is linking with the registration.

---

9) The web site states that only non-student registrations can be linked with accepted papers. I am a student and will be the presenting author; how should I register?

9-Ans) The policy is that each paper should be linked with a non-student-rate registration. Students who are the only presenting authors of papers should choose one of the non-student rates. For example, a student who is an IEEE Graduate Student Member and is the only attending author of a paper should choose to register at the IEEE Member rate. A student who is not a member of IEEE in any way should choose to register at the Non-Member rate. Please DO NOT have an author who does not intend to attend register only to link papers.

---

10) The members of our team have not yet decided who will be the one(s) to attend and present our paper(s), but the author registration deadline is approaching. Can we change the name of the person registered later on?

10-Ans) A replacement presenter can register first, and then a refund for the original presenter can be considered, in conjunction with all other registration policies. Such requests must be received no later than 2 weeks prior to the start of the event.

---

11) When I registered, I was not a member of IEEE, but I recently did join. Can I receive a refund of the difference between the member and non-member registration fees?

11-Ans) No, one must be a member of IEEE at the time of registration in order to receive the lower registration fee benefit. Joining IEEE can be done online quickly and the Member Number is assigned within a few days in most cases.

---

Part II: Preparation of the Paper

Document Formatting

Use the following guidelines when preparing your document:

LENGTH: You are allowed a total of 5 pages for your document. Up to 4 pages may contain technical content, figures, and references, while the 5th page may contain only references. This is the maximum number of pages that will be accepted, including all figures, tables, and references. Any documents that exceed the 5 page limit or have a 5th page containing anything other than references, will be rejected.

LANGUAGE: All proposals must be in English.

MARGINS: Documents should be formatted for standard letter-size (8-1/2" by 11" or 216mm by 279mm) paper. Any text or other material outside the margins specified below will not be accepted:

• All text and figures must be contained in a 178 mm x 229 mm (7 inch x 9 inch) image area.
• The left margin must be 19 mm (0.75 inch).
• The top margin must be 25 mm (1.0 inch), except for the title page where it must be 35 mm (1.375 inches).
• Text should appear in two columns, each 86 mm (3.39 inch) wide with 6 mm (0.24 inch) space between columns.
• On the first page, the top 50 mm (2") of both columns is reserved for the title, author(s), and affiliation(s). These items should be centered across both columns, starting at 35 mm (1.375 inches) from the top of the page.
• The paper abstract should appear at the top of the left-hand column of text, about 12 mm (0.5") below the title area and no more than 80 mm (3.125") in length. Leave 12 mm (0.5") of space between the end of the abstract and the beginning of the main text.

TYPE:

TITLE: The paper title must appear in boldface letters and should be in ALL CAPITALS. Do not use LaTeX math notation ($x_y$) in the title; the title must be representable in the Unicode character set. Also try to avoid uncommon acronyms in the title.

AUTHOR LIST: The authors' name(s) and affiliation(s) appear below the title in capital and lower case letters. ICIP does not perform blind reviews, so be sure to include the author list in your submitted paper. Proposals with multiple authors and affiliations may require two or more lines for this information. The order of the authors on the document should exactly match in number and order the authors typed into the online submission form.

The LaTeX template has instructions for listing one or two authors. If you need to list more than 2 authors, please use the following structure:

\name{Author Name$^{\star \dagger}$ \qquad Author Name$^{\star}$ \qquad Author Name$^{\dagger}$}
  
  \address{$^{\star}$ Affiliation Number One \\
      $^{\dagger}$}Affiliation Number Two

ABSTRACT: Each paper should contain an abstract of approximately 100 to 150 words that appears at the beginning of the document. Use the same text that is submitted electronically along with the author contact information.

INDEX TERMS (KEYWORDS): Enter up to 5 keywords separated by commas.

BODY: Major headings appear in boldface CAPITAL letters, centered in the column. Subheadings appear in capital and lower case, either underlined or in boldface. They start at the left margin of the column on a separate line. Sub-subheadings are discouraged, but if they must be used, they should appear in capital and lower case, and start at the left margin on a separate line. They may be underlined or in italics.

REFERENCES: List and number all bibliographical references at the end of the paper. The references can be numbered in alphabetic order or in order of appearance in the document. When referring to them in the text, type the corresponding reference number in square brackets as shown at the end of this sentence [2]. An additional final page (the fifth page, in most cases) is allowed, but must contain only references to the prior literature.

The end of the document should include a list of references containing information similar to the following example:

[1] D. E. Ingalls, "Image Processing for Experts," IEEE Trans. ASSP, vol. ASSP-36, pp. 1932-1948, 1988.

ILLUSTRATIONS & COLOR: Illustrations must appear within the designated margins. They may span the two columns. If possible, position illustrations at the top of columns, rather than in the middle or at the bottom. Caption and number every illustration. All halftone illustrations must be clear in black and white. Since the printed proceedings will be produced in black and white, be sure that your images are acceptable when printed in black and white (the electronic, conference-distributed proceedings and the IEEE Xplore proceedings will retain the colors in your document).

PAGE NUMBERS: Do not put page numbers on your document. Appropriate page numbers will be added to accepted papers when the conference proceedings are assembled.

---

Templates

The following style files and templates are available for users of LaTeX and Microsoft Word:

• LaTeX style file with margin, page layout, font, etc. definitions.
• BiBTeX style file with bibliography style definitions.
• LaTeX template file, an example of using the "spconf.sty" and "IEEEbib.bst" files above.
• PDF generated from the template file.
• Sample strings.bib and refs.bib files.
• Sample image1.eps, image3.eps and image4.eps files, referenced in the LaTeX template.
• Word 97/2000 Sample, a template of correct formatting and font use.

We recommend that you use the Word file or LaTeX files to produce your document, since they have been set up to meet the formatting guidelines listed above. When using these files, double-check the paper size in your page setup to make sure you are using the letter-size paper layout (8.5" X 11") or A4 paper layout (210mm X 297mm). The LaTeX environment files specify suitable margins, page layout, text, and a bibliography style.

In particular, with LaTeX, there are cases where the top-margin of the resulting Postscript or PDF file does not meet the specified parameters. In this case, you may need to add a \topmargin=0mm command just after the \begin{document} command in your .tex file. The spacing of the top margin is not critical, as the page contents will be adjusted on the proceedings. The critical dimensions are the actual width and height of the page content.

---

Part III: Submission and Review of the Paper

The review process will be performed from the electronic submission of your paper. To ensure that your document is compatible with the review system, please adhere to the following compatibility requirements:

File Format

The 'IEEE Requirements for PDF Documents' MUST be followed EXACTLY. The conference is required to ensure that documents follow this specification. The requirements are enumerated in:

• IEEE Requirements for PDF Documents v3.2 [PDF]

Papers must be submitted in either PostScript (PS) or Adobe's Portable Document Format (PDF) format.

PDF and Postscript files:

• must not have Adobe Document Protection or Document Security enabled,
• must have either 'US Letter' or 'A4' sized pages,
• must be in first-page-first order, and
• must have ALL FONTS embedded and subset.

ALL FONTS MUST be embedded in the PDF or PostScript file. There is no guarantee that the viewers of the paper (reviewers and those who view the electronic proceedings after publication) have the same fonts used in the document. If fonts are not embedded in the submission, you will be contacted by CMS and asked to submit a file that has all fonts embedded. Please refer to your PDF or PS file generation utility's user guide to find out how to embed all fonts.

---

File Size Limit

Authors will be permitted to submit a document file up to 5 MB (megabytes) in size. To request an exception, contact the paper submission technical support at: icip2023@cmsworkshops.com.

---

File Name

The filename of the document file should be the first author's last name, followed by the appropriate extension (.ps or .pdf). For example, if the first author's name is Johan Smith, you would submit your file as "smith.ps" or "smith.pdf". To speed transmission of your PostScript and PDF files, you may use a compression utility that will produce compressed archives that are 100% compatible with the ZIP compression format defined by PKWare or the GZip format common on UNIX and Linux systems. Such a utility can be downloaded from PKWare's website at: www.pkware.com. This compression is not required, but it is allowed and encouraged so that file transfer times may be reduced. If you do submit a compressed version of the document file, use the same filename specification mentioned earlier, with the appropriate file extension (for example, "smith.zip" or "smith.gz"). The paper submission process will append the filename with a unique identifier when it is stored on our system, so multiple submissions with the same name will not overwrite each other and will be distinguishable.

---

Electronic Paper Submission

When you have your document file ready, gather the following information before entering the submission system:

• Document file in PDF or PS format
• Affiliation, email address, and mailing address for each author
• Paper title
• Text file containing paper abstract text, in ASCII text format (for copying and pasting into web page form)

To submit your document and author information, go to the 'Paper Submission' link on the ICIP 2023 homepage:

https://2023.ieeeicip.org/

The submission system will present an entry form to allow you to enter the paper title, abstract text, review category, and author contact information.

Please note that the list of review categories is very detailed. Please read through the entire list of paper topics at https://cmsworkshops.com/ICIP2023/Papers/PaperTopics.asp before beginning your submission.

ALL authors must be entered in the online form, and must appear in the online form in the same order in which the authors appear on the PDF.

After you submit this information, the system will display a page with the data that you entered so that you may verify its accuracy. If you need to change the data to fix a mistake, you may use the back button on your browser to return to the information entry form. Once you approve of the data that you have entered, you may choose your document file for upload at the bottom of the verification page. When you click on the button labeled 'Continue' at the bottom of this page, the page will check the filename extension to make sure it matches the submission criteria, then your browser will upload your file to our server. Depending on the size of your file and your internet connection speed, this upload may take a few minutes. At the end of a successful upload, you will see a confirmation page displaying the paper number that is assigned to you, and and email message will be sent to the corresponding authors' email addresses to confirm that the file has been uploaded. If you do not see the confirmation page after uploading your file, we may not have successfully received your file upload. If you encounter trouble, contact the paper submission support at: icip2023@cmsworkshops.com.

---

Preprints, including Arxiv

Authors may post their preprints in the following locations:

• Author’s personal website
• Author’s employer’s website
• arXiv.org
• TechRxiv.org
• Funder’s repository*

This does not count as a prior publication. If copyright to the paper was transferred to IEEE through the completion of an IEEE Copyright Form before the preprint is posted, IEEE must be credited as the copyright holder with the following statement included on the initial screen displaying IEEE-copyrighted material:

“© 20XX IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.”

Upon publication of the paper, the paper’s Digital Object Identifier (DOI) should be added.

Complete information regarding posting of your paper are detailed at https://conferences.ieeeauthorcenter.ieee.org/get-published/post-your-paper/.

---

IEEE Copyright Transfer Form

All submissions must have an IEEE Electronic Copyright form submitted before the manuscript is allowed to be delivered to reviewers. If the submission is not accepted, the copyright transfer form becomes null and void.

The electronic copyright form is digitally linked to your submission; if you revise/update your paper's title or author list, the copyright form will still apply. There is no need to submit a new copyright form.

The confirmation page that is displayed after uploading your final, camera-ready document file will also have a link to the IEEE Electronic Copyright Form (eCF) system. That system will guide you through a series of questions to determine the type of copyright form required for your manuscript and will electronically record your signature. You will have the opportunity to download a PDF version of your electronically-signed copyright form, and both the IEEE eCF system and the ICIP 2023 system will send you a confirmation of the receipt of the properly signed form.

---

Online Review Process

Your submitted paper will be converted to PDF format by the submission system if necessary, then visually inspected by our submission system staff to assure that the document is readable and meets all formatting requirements to be included in a visually pleasing and consistant proceedings publication for ICIP 2023. If our submission inspectors encounter errors with your submitted file, they will contact you to resolve the issue. If your paper passes inspection, it will be entered into the review process. A committee of reviewers selected by the conference committee will review the documents and rate them according to quality, relevence, and correctness. The conference technical committee will use these reviews to determine which papers will be accepted for presentation in the conference. The result of the technical committee's decision will be communicated to the submitting authors by email, along with any reviewer comments, if any.

---

Monitor Your Submission Status

After you submit your document, you may monitor the status of your paper as it progresses through the submission and review process by using the Paper Status website available at:

https://2023.ieeeicip.org/

---

Notification of Acceptance

Authors will be notified of paper acceptance or non-acceptance by email as close as possible to the published author notification date. The email notification will include the presentation format chosen for your paper (lecture or poster) and may also include the presentation date and time, if available.

The notification email will include comments from the reviewers. The conference cannot guarantee that all of the reviewers will provide the level of comment desired by you. However, reviewers are encouraged to submit as detailed comments as possible.

Because of the short amount of time between paper acceptance decisions and the beginning of the publication process, ICIP 2023 is not able to allow for a two-way discourse between the authors and the reviewers of a paper. If there appears to be a logistical error in the reviewer comments, such as the reviewer commenting on the wrong paper, etc., please contact ICIP 2023 at icip2023@cmsworkshops.com.

All papers accepted to ICIP 2023 will be published on 11 September 2023 and will be freely accessible and downloadable by all in final format from 11 September 2023 through 11 October 2023.

---

Required Author Registration

Be sure that at least one author registers to attend the conference using the online registration system available through the conference website. Each paper must have at least one author registered, with the payment received by the author registration deadline (see above) to avoid being withdrawn from the conference.

https://2023.ieeeicip.org/

---

No-Show Policy

See Conference Policies.

---

Copyright Issues for Web Publication

If you plan to publish a copy of an accepted paper on the Internet by any means, you MUST display the following IEEE copyright notice on the first page that displays IEEE published (and copyrighted) material:

Copyright 2023 IEEE. Published in 2023 IEEE International Conference on Image Processing (ICIP), scheduled for 8-11 October 2023 in Kuala Lumpur, Malaysia. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works, must be obtained from the IEEE. Contact: Manager, Copyrights and Permissions / IEEE Service Center / 445 Hoes Lane / P.O. Box 1331 / Piscataway, NJ 08855-1331, USA. Telephone: + Intl. 908-562-3966.

If you post an electronic version of an accepted paper, you must provide the IEEE with the electronic address (URL, FTP address, etc.) of the posting.

---

Part IV: Preparation of the Presentation

To help authors prepare for lecture and poster presentations, the following suggestions have been created:

Lecture Presentations

PRESENTATION TIME: Presentation time is critical; each paper is allocated 18 minutes for lecture sessions, including time for questions, session chair introductions, and any set up that is not completed in advance. We recommend that presentation of your slides should take about 14-15 minutes, leaving 3-4 minutes for introduction by the session chair and questions from the audience. To achieve appropriate timing, organize your slides or viewgraphs around the points you intend to make, using no more than one slide per minute. A reasonable strategy is to allocate about 2 minutes per slide when there are equations or important key points to make, and one minute per slide when the content is less complex. Slides attract and hold attention, and reinforce what you say - provided you keep them simple and easy to read. Plan on covering at most 6 points per slide, covered by 6 to 12 spoken sentences and no more than about two spoken minutes.

Be prepared to begin your presentation as soon as the prior presenter has finished; it is important to keep on schedule. You should meet with your session chair during the break immediately prior to your session. Meet inside or near the door of the presentation room. If the room is not being used, this will give you a chance to test any presentation equipment you will be using. Copying your files to the computer before the session will also save you some time during your presentation. Note: The presentation computer has ONLY a USB port. There is no CD-ROM or other disc drive.

ORGANIZATION OF IDEAS: Make sure each of your key points is easy to explain with aid of the material on your slides. Do not read directly from the slide during your presentation. You shouldn't need to prepare a written speech, although it is often a good idea to prepare the opening and closing sentences in advance. It is very important that you rehearse your presentation in front of an audience before you give your presentation at ICIP 2023. Surrogate presenters must be sufficiently familiar with the material being presented to answer detailed questions from the audience. In addition, the surrogate presenter must contact the Session Chair in advance of the presenter's session.

EQUIPMENT PROVIDED: All lecture rooms will be equipped with a computer, a video projector, and a microphone. Each computer will have a USB port as well as PowerPoint and Acrobat Reader software. There will be no other equipment available.

Each computer will have a recent version of the Windows OS installed, a USB port, as well as PowerPoint and Acrobat Reader software. Remember to embed all your fonts into your presentation, if you are using any special font or plug-in such as MathType.

Please, pay attention to the following critical points:

• There WILL NOT be an overhead projector in the rooms
• There WILL NOT be a CD-ROM drive in the presentation room
• Make sure your presentation does not run into a problem on Windows 10 platform, if you are a Mac or Linux user
• If you will be playing video or animated media, make sure it runs on Windows Media Player
• Embed all the fonts in your presentation

Keep in mind that some of the lecture presentations will be given in quite large lecture halls. When preparing your slides, make sure that the entire audience will be able to see your presentation.

---

Poster Presentations

ICIP 2023 offers electronic poster (e-poster) presentation. All posters will be presented on TV monitors, not conventional poster boards. Two sample e-posters are available for references. It is strongly recommended that you bring a laptop PC with an HDMI port if your e-poster contains dynamic content. If not, you may just bring a USB flash drive for a JPEG e-poster presentation.

Poster sessions are a good medium for authors to present papers and meet with the interested audience for in-depth technical discussion. In addition, attendees find the poster sessions a good way to sample many papers in parallel sessions. Thus it is important that you display your message clearly and noticeably to attract people who may have an interest in your paper.

You are encouraged to prepare talking points so that you can periodically present to those assembled around your poster throughout the poster session. You should concentrate on the key innovation and be ready to interact with the audience who approaches your poster.

Plan to arrive at the poster area (Conference Hall 1, 2 and 3) about 20 minutes before your session begins so that you have ample time to test your poster and report to the session chair. You must remain present for the entire duration of your poster session. Failing to do so may leave you a no-show or absence record.

Information about the LED TV monitors

• 50” screen with an aspect ratio of 16:9. The TV monitor has one HDMI (Type A) port and one USB 3.0 (Type A) port.
• A male-to-male HDMI cable is provided for connecting your laptop PC to the TV monitor. It comes with male HDMI (Type A, i.e. 19.3mm x 4.45mm) connectors. With this configuration, the content displayed on your laptop PC will be mirrored to the TV screen.
• The USB 3.0 (Type A) port on the TV monitor only takes USB flash drives in FAT, FAT32, or NTFS format. Only JPEG content can be displayed through this port; any other content type is not supported.
• A TV monitor for testing your poster presentation is placed in the paper presentation preparation room on the 3rd floor of the venue.

E-Poster Templates

Other important information

• All posters are limited to one single page. Any video or multimedia object should be embedded into your poster.
• Your poster should be in landscape orientation with a 16:9 aspect ratio to fit the LED TV.
• You should set the minimum font size to 42pt and the poster size to 142.24cm W x 80.01cm H (56” x 31.5”) in your PowerPoint file. See the instructions in the sample e-posters. This setting is particularly critical to obtain the correct resolution when converting your poster presentation to a JPEG file.
• Your paper ID (for example, MA2.PB.3) consists of a time code (MA2) followed by session and poster code (PB.3). Your ID is labeled on the LED screen assigned to your presentation.
• Electric outlets (240V, 50Hz, plug type G) will be provided, but no laptop or computer will be provided at the conference for poster presentation.

---

(End of File)