%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% File:     spconf.sty          (LaTeX Document style option "spconf")
%
% Usage:    \documentclass{article}
%           \usepackage{spconf}
%
%           Or for LaTeX 2.09:
% Usage:    \documentstyle[...,spconf,...]{article}
%
% Purpose:
%
% Style file for Signal Processing Society Conferences (ICASSP, ICIP).
% Features:
%    - correct page size (175mm x 226mm)
%    - twocolumn format
%    - boldfaced, numbered, and centered section headings
%    - correct subsection and subsubsection headings
%    - use \title{xx} for title, will be typeset all uppercase
%    - use \name{xx} for author name(s) only, will be typeset in italics
%    - use \address{xx} for one address of all authors
%    - use \twoauthors{author1}{address1}{author2}{address2}
%         for two (or more) authors with two separate addresses
%    - note: no need for \author nor \date
%    - optional: can use \thanks{xx} within \name or \twoauthors,
%         asterisk is not printed after name nor in footnote
%    - optional: can use \sthanks{xx} after each name within \name or
%         \twoauthors if different thanks for each author,
%         footnote symbol will appear for each name and footnote
%    - optional: use \ninept to typeset text in 9 pt; default is 10pt.
%
% Example of use for one or more authors at a common address and
%    common support. For distinct support acknowledgments,
%    use \sthanks{xx} after each name.
%
%                 \documentclass{article}
%                 \usepackage{spconf}
%                 \title{Title of the paper}
%                 \name{George P. Burdell and John Q. Professor
%                       \thanks{This work was supported by...}}
%                 \address{Common address, department \\
%                          City, etc \\
%                          optional e-mail address}
%
%                 \begin{document}
%  OPTIONAL -->   \ninept            <-- OPTIONAL, for nine pt only
%                 \maketitle
%                 \begin{abstract}
%                 This is the abstract for my paper.
%                 \end{abstract}
%                         .
%                 Insert text of paper
%                         .
%                 \end{document}
%
% Example of use for two authors at two distinct addresses with only
%    one support acknowledgment. For distinct support acknowledgments,
%    use \sthanks{xx} after each name.
%
%                 \documentclass{article}
%                 \usepackage{spconf}
%                 \title{Title of the paper}
%                 \twoauthors{John Doe
%                       \thanks{This work was supported by...}}
%                            {Doe's address, department \\
%                             City, etc \\
%                             optional e-mail address}
%                            {Judy Smith}
%                            {Smith's address, department \\
%                             City, etc \\
%                             optional e-mail address}
%
%                 \begin{document}
%  OPTIONAL -->   \ninept            <-- OPTIONAL, for nine pt only
%                 \maketitle
%                 \begin{abstract}
%                 This is the abstract for my paper.
%                 \end{abstract}
%                         .
%                 Insert text of paper
%                         .
%                 \end{document}
%
% Preprint Option (Only for preprints, not for submissions!):
%    - can create a preprint titlepage footer by using the
%         "preprint" option with the \usepackage{spconf} command
%    - use \copyrightnotice{\copyright xx} for copyright information
%    - use \toappear{To appear in xx} for publication name
% Example of preprint use:
%
%                 \documentclass{article}
%                 \usepackage[preprint]{spconf}
%                         .
%                 \copyrightnotice{\copyright\ IEEE 2000}
%                 \toappear{To appear in {\it Proc.\ ICASSP2000,
%                    June 05-09, 2000, Istanbul, Turkey}}
%
%
% PLEASE REPORT ANY BUGS
%
% Author:  Stephen Martucci  -- stephen.martucci@ieee.org
%
% Date:    3 May 2000
%
% Updated: Lance Cotton, Ulf-Dietrich Braumann, 11 May 2006
% Change:  Added keywords/Index Terms section
% Change:  Added \emergencystretch=11pt, Lance Cotton, 26-Sept-2007
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% These commands change default text fonts to the scalable PostScript
% fonts Times, Helvetica, and Courier. However, they do not change
% the default math fonts. After conversion to PDF, text will look good
% at any scale but math symbols and equations may not.
% If instead you use the PostScript Type 1 implementation of the
% Computer Modern fonts from the American Mathematical Society, which
% will make all fonts (text and math) scalable, comment out the
% following three lines. Those fonts use the same metrics as the Knuth
% Computer Modern fonts and therefore no font redefinition is needed.
\renewcommand{\sfdefault}{phv}
\renewcommand{\rmdefault}{ptm}
\renewcommand{\ttdefault}{pcr}

%\oddsidemargin  -0.31in
%\evensidemargin -0.31in
\oddsidemargin  -6.2truemm
\evensidemargin -6.2truemm

\topmargin 0truept
\headheight 0truept
\headsep 0truept
%\footheight 0truept
%\footskip 0truept
\textheight 229truemm
\textwidth 178truemm

\twocolumn
\columnsep 6truemm
\pagestyle{empty}

\emergencystretch=11pt

\def\ninept{\def\baselinestretch{.95}\let\normalsize\small\normalsize}

\def\maketitle{\par
 \begingroup
 \def\thefootnote{}
 \def\@makefnmark{\hbox
 {$^{\@thefnmark}$\hss}}
 \if@twocolumn
 \twocolumn[\@maketitle]
 \else \newpage
 \global\@topnum\z@ \@maketitle \fi\@thanks
 \endgroup
 \setcounter{footnote}{0}
 \let\maketitle\relax
 \let\@maketitle\relax
 \gdef\thefootnote{\arabic{footnote}}\gdef\@@savethanks{}%
 \gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax}

\def\@maketitle{\newpage
 \null
 \vskip 2em \begin{center}
 {\large \bf \@title \par} \vskip 1.5em {\large \lineskip .5em
\begin{tabular}[t]{c}\@name \\ \@address
 \end{tabular}\par} \end{center}
 \par
 \vskip 1.5em}

\def\title#1{\gdef\@title{\uppercase{#1}}}
\def\name#1{\gdef\@name{{\em #1}\\}}
\def\address#1{\gdef\@address{#1}}
\gdef\@title{\uppercase{title of paper}}
\gdef\@name{{\em Name of author}\\}
\gdef\@address{Address - Line 1 \\
               Address - Line 2 \\
               Address - Line 3}

\let\@@savethanks\thanks
\def\thanks#1{\gdef\thefootnote{}\@@savethanks{#1}}
\def\sthanks#1{\gdef\thefootnote{\fnsymbol{footnote}}\@@savethanks{#1}}

\def\twoauthors#1#2#3#4{\gdef\@address{}
   \gdef\@name{\begin{tabular}{@{}c@{}}
        {\em #1} \\ \\
        #2\relax
   \end{tabular}\hskip 1in\begin{tabular}{@{}c@{}}
        {\em #3} \\ \\
        #4\relax
\end{tabular}}}

\def\@sect#1#2#3#4#5#6[#7]#8{
   \refstepcounter{#1}\edef\@svsec{\csname the#1\endcsname.\hskip 0.6em}
       \begingroup \ifnum #2=1\bf\centering
          {\interlinepenalty \@M
             \@svsec\uppercase{#8}\par}\else\ifnum #2=2\bf
          \noindent{\interlinepenalty \@M \@svsec #8\par}\else\it
          \noindent{\interlinepenalty \@M
             \@svsec #8\par}\fi\fi\endgroup
       \csname #1mark\endcsname{#7}\addcontentsline
         {toc}{#1}{\protect\numberline{\csname the#1\endcsname} #7}
     \@tempskipa #5\relax
     \@xsect{\@tempskipa}}

\def\abstract{\begin{center}
{\bf ABSTRACT\vspace{-.5em}\vspace{0pt}}
\end{center}}
\def\endabstract{\par}

% Keyword section, added by Lance Cotton, adapted from IEEEtrans, corrected by Ulf-Dietrich Braumann
\def\keywords{\vspace{.5em}
{\bfseries\textit{Index Terms}---\,\relax%
}}
\def\endkeywords{\par} 

\def\copyrightnotice#1{\gdef\@copyrightnotice{#1}}
\let\@copyrightnotice\relax
\def\toappear#1{\gdef\@toappear{#1}}\let\@toappear\relax

\newif\if@preprint\@preprintfalse
\@namedef{ds@preprint}{\global\@preprinttrue}
\@options
\def\ps@preprint{\def\mypage{}\let\@mkboth\@gobbletwo\def\@oddhead{}
  \def\@oddfoot{\rlap{\@toappear}\hfil\mypage\hfil
    \llap{\@copyrightnotice}
    \gdef\mypage{\thepage}\gdef\@toappear{}\gdef\@copyrightnotice{}}}

\if@preprint\ps@preprint
\else\ps@empty\flushbottom\fi

\def\thebibliography#1{\section{References}\list
 {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
 \advance\leftmargin\labelsep
 \usecounter{enumi}}
 \def\newblock{\hskip .11em plus .33em minus .07em}
 \sloppy\clubpenalty4000\widowpenalty4000
 \sfcode`\.=1000\relax}
\let\endthebibliography=\endlist

\long\def\@makecaption#1#2{
 \vskip 10pt
 \setbox\@tempboxa\hbox{#1. #2}
 \ifdim \wd\@tempboxa >\hsize #1. #2\par \else \hbox
to\hsize{\hfil\box\@tempboxa\hfil}
 \fi}

\def\fnum@figure{{\bf Fig.\ \thefigure}}
\def\fnum@table{{\bf Table \thetable}}

\flushbottom

%%%% EOF