MOP.P.11
UTILIZATION OF 3D PRINTING TECHNIQUE FOR MANUFACTURING PLANAR MARCHAND BALUN FED UHF WIDEBAND VIVALDI ANTENNA
Muhammad Farhan Maulana, Institut Teknologi Bandung, Indonesia; Zulfi Zulfi, Telkom University, Indonesia; Achmad Munir, Institut Teknologi Bandung, Indonesia
Session:
MOP.P: Poster session #1 Poster
Track:
RFID applications in healthcare, wearable, precision agriculture, transportation, safety, security, inventory management, logistics, fashion, retail
Location:
Poster Area
Presentation Time:
Mon, 4 Sep, 16:30 - 18:00 Portugal Time
Abstract
This paper introduces the application of 3D printing technology in fabricating a Vivaldi antenna that utilizes a Marchand balun as its feed. The purpose of this antenna is to operate within the ultra-high frequency (UHF) range. By incorporating the Marchand balun, this research enables the conversion of unbalanced signals into balanced signals, thereby catering to electronic systems that rely on balanced signals. To construct the antenna, a polylactic acid (PLA) dielectric substrate is employed, while the conductive components are coated with superconductive paint. The proposed antenna exhibits resonance between frequencies of 0.74 GHz and 1.17 GHz, offering a bandwidth response of 0.43 GHz and achieving a maximum gain of 1 dBi at its resonant frequency.
Presentation
Discussion
Resources
No resources available.
Session MOP.P
MOP.P.1: Replay Cyberattack Detection in an IoT-based Healthcare System using RFID Sensors
Rezvan Nozaripour, Khashayar Khorasani, Concordia University, Canada
MOP.P.2: Securing RFID-Based Attendance Management Systems: An Implementation of the AES Block Cipher Algorithm
Faith Ayodele, Harsehaj Singh, Eslam G. AbdAllah, Concordia University of Edmonton, Canada
MOP.P.3: Enhancing Radio Frequency Identification Systems Security using KLEIN algorithm
Grishma Raj Gautam, Varshini Murali, Eslam G. AbdAllah, Concordia University of Edmonton, Canada
MOP.P.4: MULTILAYER ANTI-COUNTERFEITING TAG WITH HOLOGRAPHIC ELEMENTS INTEGRATED INTO A COMPACT RFID SYSTEM
Cătălin Pârvulescu, Martino Aldrigo, Roxana Tomescu, Veronica Anăstăsoaie, Dana Cristea, National Institute for Research and Development in Microtechnologies -IMT Bucharest, Romania
MOP.P.5: EARLY MALWARE DETECTION AND NEXT-ACTION PREDICTION
Zahra Jamadi, Amir G. Aghdam, Electrical and Computer Engineering Department, Concordia University, Montreal, Canada., Canada
MOP.P.6: WIRELESS CARBON-BASED ELECTROCHEMICAL DOPAMINE SENSOR BRAIN IMPLANT
Stefanus Wirdatmadja, Wiljami Ventilä, Janne Vesanen, Toni Björninen, Riikka Lahtinen, Lauri Sydänheimo, Tampere University, Finland; Merja Voutilainen, University of Helsinki, Finland; Leena Ukkonen, Tampere University, Finland
MOP.P.7: Robust RFID Antenna for Tracking Health Products and Water Bottles
Pape Waly SARR, Ibra DIOUM, Aminata DIOP, ESP/UCAD, Senegal
MOP.P.8: RFID-Based Inventory System for Biomedical Equipment in Peruvian Healthcare Centers: Ensuring Data Privacy and Preventing Unauthorized Access.
Daniela Sandoval, Edu Marin, Estefany Macedo, Diego Segura, Alejandra Miranda, Sandra Perez, Pontificia Universidad Católica del Perú, Peru
MOP.P.9: Wearable Real Time Location Services Technology for Staff Duress in Healthcare
Derick Jones, Ryan Hatton, Timothy Wallerich, Laurie Riekmann, Bonnie Handmacher, Heather Heaton, Mayo Clinic, United States of America
MOP.P.10: ADDITIVE MANUFACTURING TECHNOLOGIES FOR WIRELESS ANTI-COUNTERFEITING SOLUTIONS
Simone Genovesi, Suvadeep Choudhury, Armin Gharibi, Filippo Costa, Giuliano Manara, Università di Pisa, Italy
MOP.P.11: UTILIZATION OF 3D PRINTING TECHNIQUE FOR MANUFACTURING PLANAR MARCHAND BALUN FED UHF WIDEBAND VIVALDI ANTENNA
Muhammad Farhan Maulana, Institut Teknologi Bandung, Indonesia; Zulfi Zulfi, Telkom University, Indonesia; Achmad Munir, Institut Teknologi Bandung, Indonesia